环境空气质量新标准对郑州和开封空气质量评价的影响

利用河南省环境空气质量新标准实施一期城市(郑州、开封)2013年的环境空气自动监测数据,分析了实施《环境空气质量标准》(GB 3095—2012)对这2个城市空气质量评价的影响。研究发现,若采用新标准,郑州、开封污染物年均浓度超标情况加重;城市空气质量达标率从51%、71%下降到35%和31%,下降了16和40个百分点;PM2.5的纳入是空气质量达标率下降的最主要原因,大于NO2标准的收严和CO、O3纳入评价指标的影响,其超标率分别为58%(郑州)和63%(开封);且PM2.5取代PM10成为郑州、开封的首要污染物,其作为首要污染物的比例均大于70%。     

淮河支流污染物综合降解系数动态测算

确定河流污染物综合降解系数动态变化规律对提高水环境容量测算精度和水环境管理具有重要意义。通过现场模拟法,采用一维稳态模型测算了淮河支流洪河五沟营-塔桥乡河段COD、氨氮和总磷在枯水期、平水期和丰水期的综合降解系数,COD、氨氮和总磷降解系数在各水期的关系为枯水期平水期丰水期,提出了建议值并利用实测浓度对计算结果进行了检验,结果表明,不同水期综合降解系数吻合情况较好。     

空气质量AQI实时发布的改进探讨

针对《环境空气质量指数(AQI)技术规定(试行)》(HJ 633-2012)中对空气质量AQI实时发布存在的欠缺,从增加颗粒物1 h浓度的AQI分级浓度限值及颗粒物24 h滑动平均值计算方法改进着手,解决PM2.5和PM10的24 h滑动平均值实时延迟、1 h平均值代替24 h滑动平均值偏高等问题。     

Gasification characteristics of biomass for tar removal by secondary oxidant injection

Gasification experiments for sawdust were conducted using a fixed bed reactor at 900 °C by varying the secondary oxidant injection ratio to determine the optimal conditions for tar removal along with the enhancement of gasification efficiency. Secondary oxidant was injected as an oxidant at the top zone of the gasifier in varying ratios of 10–30% of the total amount of oxidant. This method was based on the primary method of tar removal and gasification efficiency improvement by thermal cracking of tar. Various gasification performance parameters were evaluated and tar content was estimated by measuring the fluctuation of weight of the activated carbon filter. The results showed that the concentration of tar in the producer gas decreased by injecting the secondary oxidant, even though syngas yield decreased. The recycling potential of the char produced in the gasification experiments was also assessed with the purpose of utilizing char as an adsorbent by determining its surface area and pore volume. The results demonstrated that the char produced from the gasification experiment had similar quality to that of the activated carbon used in this experiment.     

Distillers’ grains anaerobic digestion residue biochar used for ammonium sorption and its effect on ammonium leaching from an Ultisol

Environmental Science and Pollution Research - The aim of this work was to explore the potential application of biochar from distillers’ grains anaerobic digestion residue pyrolyzed at...     

不同边沿高度油池火燃烧行为的实验和数值模拟研究

采用实验和FDS数值模拟相结合的方法,探讨了边沿高度对油池火燃烧特性的影响。在实验部分,研究了燃烧速率和表观火焰高度随边沿高度的变化趋势,并分别分析了各个阶段的热反馈机制。在实验获得不同尺度、边沿高度正庚烷油池火燃烧速率的前提下,建立相应尺度的不同边沿高度油池火的Fire Dynamics Simulator(FDS)计算模型以针对火焰高度进行了数值模拟研究,分析了实际火焰高度、火焰下探高度随边沿高度的变化趋势,并提出了相关的无量纲拟合式。     

Efficient microwave degradation of humic acids in water using persulfate and activated carbon

Environmental Chemistry Letters - Humic acids are complex mixtures of organic molecules of different sizes, molecular weights and functional groups such as phenols, carboxyls, quinones and amino...     

含能材料CL-20的热安全性测试分析

CL-20是一种高能量、高性能的炸药。为了研究CL-20的热分解性能,分别采用DSC-TG、DSC-TG-QMS联用系统和高压型差示扫描量热仪(DSC 204 HP)对CL-20的热安全性进行了测试分析,并计算了CL-20的热力学参数和动力学参数。结果表明,CL-20固体炸药在不同升温速率下的TG曲线基本相似,都只有一个台阶。在升温速率为10 K/min时,CL-20在放热峰温处的活化焓、活化熵和活化自由能分别是177.26 k J/mol、52.61 J/(K·mol)和149.7 kJ/mol。CL-20热分解后的气体产物主要有NO、CO、CO_2和H_2O,离子流强度约为10-9A,其中H_2O的离子流强度最大。不同压力时CL-20热分解的过程不同,在压力高的情况下CL-20分解放热更多,反应过程越剧烈,热安全性越差。与常压下相比DSC放热峰值温度降低。